FOMOS
Fomos Foster 12L Autoclave White
Fomos Foster 12L Autoclave White
Betaal in 3 termijnen van €477 met in3 – 0% rente.
Couldn't load pickup availability
SKU:154445
Out of stock
Fomos is a professional manufacturer of medical equipment and instruments, combining innovative design, advanced research and development, and high-quality production. Specialising in autoclaves and sterilisation equipment, the brand provides solutions that guarantee reliability, safety and operational efficiency in beauty, dental and medical practices.
Safe sterilisation of a wide range of instruments
The Fomos Foster 12 L autoclave is a professional piece of equipment that is ideal for any beauty salon, nail salon and other venues where maintaining the sterility of tools used during treatments is essential. Sterilisation using a top-class medical-grade autoclave ensures the full effectiveness and safety of the process, thereby facilitating the maintenance of high hygiene standards in the clinic. The equipment is designed for the sterilisation of both medical and non-medical instruments, whether packaged or unpackaged, porous, solid, or featuring recesses and channels. The device may only be operated by qualified staff who possess the knowledge and appropriate training in the use of this type of equipment.
Improvements to enhance functionality
The unit is equipped with a control panel featuring an LED display, allowing the selection of appropriate programmes or parameters and real-time monitoring of the process. The built-in thermal printer allows for the printing of sterilisation process confirmations, which include information such as: the date and time of the cycle, and changes in temperature and pressure. Additionally, the USB port allows sterilisation results to be saved in digital form. Built-in tanks for distilled water and waste water significantly streamline operations. The self-diagnostic system alerts the user to any faults by displaying relevant messages, e.g. regarding a door seal failure or sensor damage, thereby reducing the risk of equipment damage.
Available sterilisation and test programmes
The autoclave comes pre-programmed with: 5 sterilisation programmes and 2 test programmes – enabling the performance of vacuum tests and B&D-Helix tests. It allows parameters to be selected to suit individual needs and the specific load, while maintaining full process safety. It is also possible to adjust the sterilisation and drying times, which makes it easier to tailor the cycle to the type of instruments and the specific characteristics of the packs.
.STERILISATION PROGRAMMES
| Sterilisation programme | Load type | Cycle type | Temperature | Pressure | Pre-vacuum ratio | Sterilisation stage time* | Drying stage time* |
| 134°C universal | Programme designed for the sterilisation of packaged instruments | Class B | 134°C | 210 kPa | 3-cycle | 4 minutes | 10 minutes |
| 134°C rapid | Programme designed for sterilising unpackaged instruments | Class S | 134°C | 210 kPa | 1 cycle | 4 minutes | 10 minutes |
| 134°C prions | Applies to persistent viruses | Class B | 134°C | 210 kPa | 3 times | 20 minutes | 10 minutes |
| 121°C universal | Programme designed for sterilising packaged instruments | Class B | 121°C | 110 kPa | 3-cycle | 20 minutes | 20 minutes |
| 121°C rapid | Programme designed for sterilising unpackaged instruments | Class S | 121°C | 110 kPa | Single cycle | 20 minutes | 9 minutes |
* The preheating phase and the cooling-off period must be added to the total duration of each programme.
| Medical Class B | The most advanced sterilisation class, enabling effective sterilisation of both packaged and unpackaged instruments, regardless of their type, thanks to the use of a fractionated pre-vacuum. |
| 12-litre capacity | Ideal for beauty salons or clinics. It accommodates a basket with 3 trays on which both packaged and unpackaged instruments can be placed. |
| Legal requirements | The device complies with the requirements of Directive 93/42/EEC concerning medical devices. It also complies with the standards IEC 61010-1: 210+A1:2016, IEC 61010-2-040: 2020, EN 13060: 2014 A1: 2018, IEC 61326-1: 2020. The manufacturer holds EN ISO 13485:2016 certification. |
| Built-in printer | Thermal paper is used, which avoids the hassle of replacing ink cartridges. |
| USB port | Enables digital recording of sterilisation data onto a USB drive. |
| Sterilisation of instruments in bulk or in packs | Both sterilisation methods are highly effective. |
| Control panel with LED display | Allows you to easily select the appropriate programme and set the parameters. During the process, it displays the temperature, pressure and time. |
| 7 automatic programmes | 5 sterilisation programmes, 2 test programmes |
| Built-in tanks for distilled and waste water | The clean water tank is designed for distilled or deionised water used for sterilisation. The presence of a waste water tank means there is no need for an additional external container. |
| Automatic cleaning programme | After 300 sterilisation cycles, the system automatically prompts you to run the cleaning programme, which takes 15 to 20 minutes. |
| Self-diagnostic system | On-screen messages help prevent damage. |
| Stainless steel chamber | The material used is designed for medical applications and is durable, which attests to the high quality of the device’s construction. |
| Technical passport | Included in the set. |
| Warranty | 12 months. The duration of the warranty is not dependent on the number of cycles performed. |
Technical data
| Certificates and standards | 93/42/EEC EN ISO 13485:2016 IEC 61010-1: 210+A1:2016, IEC 61010-2-040: 2020, EN 13060: 2014 A1: 2018, IEC 61326-1: 2020 |
| Power | 1800 W |
| Rated voltage | 230 V AC |
| Vacuum level | 1-stage and 3-stage |
| Packaging dimensions | 710 x 550 x 525 mm |
| External dimensions | 560 x 408 x 420 mm |
| Chamber material | stainless steel |
| Chamber dimensions | depth 350 mm ø 200 mm |
| External tray dimensions | 26 x 14.5 x 1.5 mm |
Please read the instructions carefully before use.
Included: autoclave , tray frame, three trays, handle for removing the tray, printer paper, hose for draining used water, power cable, door seal, user manual, technical data sheet.
